By clicking “Accept”, you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts. View our Privacy Policy for more information.
We apologize but our blog is available only in English, Spanish and Russian.
Braiins OS+

Extend Your Bitcoin Mining Hardware's Lifespan with Dynamic Performance Scaling

Dynamic Performance Scaling is a cutting-edge feature that automatically adjusts your bitcoin mining device's power consumption depending on temperature. It helps boost efficiency, minimize downtime, and extend the lifespan of your bitcoin mining devices.

Published on May 09, 2023
Published on May 09, 2023

Table of Contents

More Power Does Not Always Equal More Hashrate

While temperature always has an impact on the efficiency and safety of computing hardware, our research has shown that this relationship is particularly pronounced for Antminer S19 series hardware - even compared to other miner models like the S9 and M20S. The higher the external temperature goes, the more power your miner will consume without producing more hashrate. In other words, higher temperatures result in worse J/TH efficiency.

This relationship (shown in the chart below using Antminer S19 and S19j machines) is not firmware dependent! It is simply a feature of the hardware, regardless of what firmware you are running on it.

However, Braiins OS+ has a very important feature, Dynamic Performance Scaling (DPS), which can be used to better control your miners’ power consumption while also preventing downtime and hardware failures that occur more frequently in hot summer months. In this blog, we will show you how DPS works in action.

How It Works

  1. Set a Hot Temperature at which you want the miner to reduce its power consumption and thus produce less heat.
  2. Set a Power Step, the amount (in Watts) by which you want to reduce the target power consumption if the Hot Temperature is reached.
  3. Set a Minimum Power Limit at which the miner will shut off to cool down for a user-set time period before restarting at the original target power consumption.
  4. When the miner reaches the Hot Temperature, Braiins OS+ automatically reduces the target power consumption by the amount you defined in the Power Step input.
  5. The process repeats and target power consumption is further reduced each time that the Hot Temperature is reached until it hits the Minimum Power Limit.

Now, if we consider the relationship between temperature and power consumption, it’s possible to not just use Dynamic Performance Scaling as a safety measure to prevent downtime and overheating, but to also use it as a means of managing the total power consumption of your mining fleet. In other words, if increased temperature leads to increased power consumption, then setting up DPS to occur at lower Hot Temperatures (e.g. at 70oC or 80oC instead of the typical 90oC) will prevent your total power consumption from going too high during the hottest parts of the day because the machines will automatically run at lower settings during those times, as shown below.

In the image above, you can see DPS in action as chip temperatures and power consumption rise, with a Hot Temperature of 80oC and a Power Step of 250W. When the Hot Temperature is hit at 14:00, DPS automatically drops the power consumption target by 250W. While real power consumption would have peaked above 3600W without DPS, it drops down to 3300W after DPS scales down the power target and chip temperatures never climb back to 80oC. Once certain conditions* are met (occurring at 19:30 in our case study), DPS automatically scales the target power consumption back up towards your original power consumption target. This is why there is no difference between the power consumption with DPS OFF or DPS ON by 21:00—outside temperatures have dropped and DPS has scaled back up.

*Hashboard temperature is at least 5oC below the Hot Temperature, the device is below the Hot Temperature for at least 30 minutes, fan speed is below 80% (or the device is running in immersion configuraton (min_fans=0)), and tuner status is at stable for at least 30 minutes. Also note that the lowering or raising of the power target or the hashrate target by DPS will not restart the Tuner and the current state of the Tuner will not be affected.

Dynamic Performance Scaling Out in the Field

Christian Krautter, President of American BitPower, a bitcoin mining hosting provider with facilities in multiple continents, has been using Braiin OS+’s Dynamic Performance Scaling feature at his facilities. He had this to say about his experience; “Our company has greatly benefited from BraiinsOS+'s Dynamic Performance Scaling (DPS) feature, which has been crucial in maintaining consistent mining operations during extreme weather conditions. When faced with 115-degree temperatures in Oklahoma, DPS intelligently scaled back power usage, preventing potential damage to our equipment and ensuring smooth operations. This feature has not only increased our hardware's longevity but also contributed to cost savings. By maximizing our return on investment and optimizing performance, DPS is a valuable tool for any mining operation looking to maintain stability and reduce operational costs in challenging environments.”


The Dynamic Performance Scaling settings can be configured in batch for hundreds or even thousands of devices at a time by using the BOS Toolbox, as described in our documentation. It may be worthwhile to test different DPS configurations on different groups of miners to see what’s optimal for your particular operation.

Important Notes

Saving tuning profiles: One critical thing to mention is that the autotuning process takes some time (6+ hours), but once it has been completed, the settings are saved in a profile so that you can go back to it later without waiting for it to tune again. To make DPS more efficient, it makes sense to tune your machines at those lower power consumption target levels and to set your Power Step amount to use those profiles. For example, you could tune your S19 machines at 3250W, 3000W, and 2750W in order to be able to seamlessly switch between profiles in the hot summer months with a 250W Power Step.

Power curve estimation: In the case study above and in our research on the impact of temperature on power consumption for Antminer S19 models, we are measuring power consumption directly at the wall to ensure accuracy. We do also have a power consumption estimate in the Braiins OS+ GUI which is calibrated with temperature data so that it increases as hashboard temperature does. However, this estimation gets less precise the further from the target power consumption we get. With more steady temperatures maintained via cooling and DPS, the accuracy of the power consumption estimate is also more reliable.

You can view the changelog also in our documentation.
See the full changelog

Get notified when we release new update

By subscribing you are agreeing to our Privacy Policy
Wohoo! You're subscribed, we'll be in touch soon.
Something went wrong. Please try again.
Share now

About Braiins

Bitcoin mining software company: Braiins Pool, Braiins OS+ & Stratum V2.

By miners, for miners.

Still scrolling?
Keep reading!